The following example displays the DM I/O details for the Server Switch. show ib sm switch {subnet-prefix prefix | all} [node-guid guid][summary]. When the all keyword follows the show b-agent switch command, it displays statistics for all switches in the chassis. Table6-45 show ib sm switch-route Command Output Field Descriptions. The following example displays the completed and ongoing diagnostic tests on card 3. Displays the attributes of all channel adapters on your Server Switch. The value (an integer) indicates the enabled link-width sets for this port. the default host name is localhost. To display the information for neighbors CDP has discovered, enter the show cdp neighbors command in User Exec mode or Privileged Exec mode. retry One possible reason for discarding such a packet could be to free-up buffer space. (Optional) Displays the type of device discovered, the device name, the number and type of the local interface (port), the number of seconds the CDP advertisement is valid for the port, the device type, the device product number, and the port ID. I recently started as a remote manager at a company in a growth cycle. ip To remove an IPv4 ACL from an interface, use the no form of this command. ip domain-list domain-name [ use-vrf name ], no ip domain-list domain-name [ use-vrf name ]. The name can be any case-sensitive, alphanumeric string up to 32 characters. Table6-38 describes the fields in the showibsmnode command output. To display the SM route switch element table, enter the showibsmswitch-elem-route command in User Exec mode or Privileged Exec mode. The value of the LMC specifies the number of path bits in the LID. The following example displays a node configuration in summary form. In most cases you'd set up a group dns server-group GROUP_NAME name-server 8.8.8.8 domain-name BRIANSNETWORK.NET So, in ther running configuration, look for dns server-group and the lines after. Integer value that indicates the enabled link-width sets for this port. Maximum propagation delay allowed for this port to reach any other port in the subnet. Indicates the type of connection dynamically discovered for the interface port. Defines a static hostname-to-address mapping in the hostname cache. Specifies the LID(s) of the port(s) that you want to view. show bridge-forwarding [integer] [subnet subnet-prefix prefix-length]. Cumulative number of IP datagrams that the port discarded because a route could not be found to transmit them to their destination. The name can be any case-sensitive, alphanumeric string up to 63 characters. Total number of I/O bytes read by the target device. Cumulative number of packets, delivered by this sub-layer to a higher layer, that were addressed to a broadcast address at this sub-layer. To display the status and address information for the virtual InfiniBand Management port, enter the show interface mgmt-ib command in User Exec mode or Privileged Exec mode. The range of values is from 0 to 1023. Operational (actual) duplex type at which the port runs. Refer to InfiniBand Architecture, Vol. Table6-40 describes the fields in the showibsmport command output. domain-name Maximum transmission unit (MTU) of the target, in bytes. A count of frames received on a particular interface that exceed the maximum permitted frame size. The following example displays a summary of the services on the Server Switch. Default LinkDown state to return to. To display the attributes of Ethernet ports, enter the show interface ethernet command in User Exec mode or Privileged Exec mode. (Optional) Displays subnet management agent (SMA) information. To display completed or ongoing diagnostic tests for cards, enter the show diagnostic card command in User Exec mode or Privileged Exec mode. Administrative limit for the number of virtual lanes allowed to the link. 1, Release 1.1, for more information. This displays, at a minimum, 1 for all nodes including switches. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of the frame-too-longs, alignment-errors, or fcs-errors object. The value is 256, 512, 1024, 2048, or 4096. Syntax Router (config)#ip domain-name <name> Example In the below example, we set R1 to have a domain name of "cisco.com". name, 5. (Optional) Backup IP address whose details you want to view. To configure a domain name string for the client, use the following command in DHCP pool configuration mode: Command Purpose. Last action that an administrator performed on the test. If there are two instances of the image field, the second instance indicates a second system image present on the card. Number of the bridge group that bridges the subnet. 1, Release 1.1, for more information. (Optional) Displays statistical data of the transmissions that occur on the backup IP addresses. Displays enabled or disabled to indicate validation status. Subnet prefix of the subnet manager that you want to view. The following example shows the general information about a specific IP address on an Ethernet interface port. Specifies the subnet prefix of the subnet manager that you want to view. 32-bit bitmask that specifies the supported capabilities of the port. ib smshow ib sm configurationshow ib sm multicastshow ib sm neighborshow ib sm partitionshow ib sm port. Table6-59 lists and describes the fields in the statistics keyword output. Displays all Fibre Channel ports on your Server Switch. LinkDown state to return to. This command displays the ports within Server Switches through which traffic travels from a source LID to a destination LID. Special purpose string buffer for InfiniBand trap data. Table6-49 lists and describes the fields in the mcast-info keyword output. A port within a node can return the node GUID as its PortGUID if the port serves as an integral part of the node and you cannot replace the port in the field (not swappable). 1, Release 1.1. To display SRP targets that an initiator can access through one of its virtual ports, enter the showfcsrpinitiator-wwpn-view command in User Exec mode or Privileged Exec mode. dns domain Set this field to 0 to indicate that the lease period is never to expire. Bug Search Tool and the (Optional) Specifies the LID of the service (the LID of the node that provides the service). The lease period indicates the length of time that the M_Key protection bits remain non-zero after a SubnSet (Portinfo) fails an M_Key check. A transition identifies a port change from down to initialize, initialize to down, armed to down, or active to down as a result of link state machine logic. Note The controller and controllerIb12port4x cards serve as an exception to these rules. Table6-3 describes the fields in the show backplane command output. Current FPGA firmware version that the card runs. The show boot-config command displays the image that initializes chassis firmware and configures the interfaces. To display completed or ongoing diagnostic tests for InfiniBand switch ports, enter the show diagnostic interface ib command in User Exec mode or Privileged Exec mode. client side ip domain lookup ip name-server 3.3.3.3 ip domain lookup source-interface Loopback0 server side ! Indicates a change in port state. Table6-26 show fc srp statistics Command Field Descriptions. This value also affects the maximum rate at which traps can be sent from this port. The following example displays diagnostic test results for a fan. If your device has both IP and ISO CLNS enabled and you want to use ISO CLNS network service access point (NSAP) addresses, you can use the DNS to query these addresses, as documented in RFC 1348. Fibre Channel protocol address of the target. Speed that the link between the host and your device supports. Typically, it is easier to refer to network devices by symbolic names rather than numerical addresses (services such as Telnet can use hostnames or addresses). IP DNS-based translation is specified, the addresses of the name servers are specified, and the default domain name is given. This command provides the software version, contact information, system up-time, time of last configuration change, and the last action performed on the Server Switch. Displays "enabled" if you have activated the server with the ip http server command. Number of the card to trace. Table6-51 port-info Keyword Output Field Descriptions. Determines that electricity flows between nodes so they can hand-shake. 1, Release 1.1, section 14.2.4, "Management Key.". Use the show hosts command to display the cached hostnames and the DNS configuration. (Optional) Displays current secure HTTP server settings. This command primarily serves to help management tools continuously monitor power supply status. Table6-62 lists and describes the fields in the show interface gateway command output. ftp-server enablehistoryradius-serversnmp-serverntphostnameiptelnetterminal. Cumulative number of incoming packets destined for all ports on the fabric. Total amount of memory used in local RAM. Port ID of the InfiniBand node. To display attributes of the multicast groups on your Server Switch, enter the show ib sm multicast command in User Exec or Privileged Exec mode. The debug domain command can be used along with debug x25 events to observe the whole DNS-based X.25 routing data flow. Table6-78 lists and describes the fields in the show user command output. If this feature does not apply to the storage, no output appears. Number of services that the IOC provides. This value always appears as 2.5 Gbps. Statistical data is comprised of transmission errors, requests, discards, packet fragments, etc. dst-lid 9 summary, show ib sm switch-route subnet-prefix fe:80:00:00:00:00:00:00 src-lid 858 IP name server addresses are not configured. http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a00800c525f.shtml Jon 5 Helpful Share To display the attributes of Fibre Channel ports, enter the show interface fc command in User Exec mode or Privileged Exec mode. This counter does not increment when the interface is operating in full-duplex mode. The following example displays the authentication method that the Server Switch uses. Table6-66 statistics Keyword Output Field Descriptions. If your network devices require connectivity with devices in networks for which you do not control name assignment, you can assign device names that uniquely identify your devices within the entire internetwork. Last action that an administrator applied to the test. The GID of a service matches the GID of the host that provides the service. The bits are: 0, 11-15, 18, 21-31 (Reserved and always 0. 1, Release 1.1, for more information. Lowest arbitration value allowed by the arbiter in determining the next packet in a set of packets to transmit across the link. Total amount of local flash memory space being used by the card. (Optional) GUID of an individual node that you want to view. Table6-42 show ib sm subscription Command Field Descriptions. Specifies the subnet prefix of the subnet managers that you want to view. 1, Release 1.1. Used with the virtual-lane arbitration table. Description of the port, in slot#/port# format. The following example shows the login information of the current user. Displays the port power connector dongle type variable. Specifies the subnet prefix of the nodes that you want to view. as the delimiting characters. Ports on your Server Switch through which the initiator of the IT pair passes traffic. This example shows how to configure an Ethernet interface as the source interface for a DNS lookup: Displays information about the DNS source interfaces. The following example displays the available test parameters: To display completed or ongoing diagnostic tests the chassis, enter the show diagnostic chassis command in User Exec mode or Privileged Exec mode. The show location command displays some contact information to the user, however, it may be configured to display any desired text string. Cumulative number of outstanding SRP commands. When you obtain your Internet domain name, you also should apply for an inaddr.arpa domain. In particular, an instance of this object may represent a count of transmission errors on a particular interface that is not otherwise counted. domain Fan number. To display aggregate SRP I/O statistics for all ITLs on your Server Switch, enter the showfcsrpstatistics command in User Exec mode or Privileged Exec mode. The domain namespace is divided into areas called zones that are points of delegation in the DNS tree. The format is slot#/port#. IP Addressing: DNS Configuration Guide, Cisco IOS Release 15M&T, View with Adobe Reader on a variety of devices, View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone. Table6-9 describes the fields in the show card-inventory command output. Table6-63 lists and describes the fields that appear when you use the fc srp initiator-target argument with the show interface gateway command. ip dns source-interface { ethernet slot / port | loopback intf-num } [ vrf { vrf-name | default | management }], no ip dns source-interface { ethernet slot / port | loopback intf-num } [ vrf { vrf-name | default | management }]. The following table provides release information about the feature or features described in this module. soa Number of GUID entries allowed for this port in the port table. Maximum number of cold syncs that may take place during the cold sync period. show diagnostic interface ib {port | all}. 1, Release 1.1, for more information. ", Initial value of the lease-period timer in seconds. 1, Release 1.1. Your daily dose of tech news, in brief. (Optional) Displays the services that run on the IOC(s). Name of the IPv4 ACL. Included in this information are the route destination, route type, route protocol, next hop, and port used. Maximum amount of time that elapses before a SRP request times out. [ip-address]. Name resolvers are programs that extract information from name servers in response to client requests. A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. Host port that connects to your Server Switch. Displays the HTTP port number that the HTTP server uses. After a name is resolved using DNS, use the show hosts command to view the cached hostnames and the DNS configuration. Maximum number of standby SMs that the master supports. [refresh-interval [retry-interval [expire-ttl [minimum-ttl]]]], 8. Number of subnet management packets (SMPs) that have been received on this port with invalid M_Keys since initial power up or the last reset. IP address that you assigned to the port. Total number of I/O bytes written by the target device. The following example displays POST error messages on a Cisco SFS 7000. name The following example traces application 9, module 1, card 2. World-wide node name (WWNN) of the target. domain-name The value of this field may be up or down. The following example displays the initiators that users have configured on the Server Switch. The value is enabled or disabled. fc srp lushow fc srp initiatorshow fc srp itlshow interface fc. Table6-36 show ib sm multicast Command Field Descriptions. Displays "yes" if the port supports auto-negotiation. The following example displays the LUs (storage disks) that connect to the Server Switch. The action can be discover-itl or auto-bind. This behavior presents a problem when a high volume of users all arrive at the first host during the TTL time. fc srp-global gateway-portmask-policy restrictedfc srp-global itlfc srp itfc srp targetshow fc srp initiatorshow interface fctype. A late collision included in a count represented by an instance of this object is also considered as a generic collision for purposes of other collision-related statistics. The field will always display nl-port, because all storage-to-IB host connections occur over a virtual port, or NL_Port. (Optional) Up to five additional IPv4 addresses in the x.x.x.x format. (Optional) Shows the performance monitoring port with monitored error information. Possible values are: none (when no action was taken), success, in-progress, or fail.Any result other than "Operation completed successfully" occurs due to interface errors. Displays "enabled" or "disabled" to indicate polling status. A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. Coding errors detected by the physical layer for speeds above 10 Mbps will cause the frame to fail the FCS check. This section provides examples of debugging output that is logged when a device is configured as an authoritative name server for its own local host table and the debug domain command is in effect: For DNS-based X.25 routing, the debug x25 events command supports functionality to describe the events that occur while the X.25 address is being resolved to an IP address using a DNS server. Maximum high-priority limit on the number of bytes allowed for transmitting high-priority packets when both ends of a link operate with multiple data virtual-lanes. The following example displays details about one LU. The following example displays the attributes of the IP address of the gateway port. Port, list of ports, or range of ports to display. This configuration is needed only if the zone for which the system is authoritative will also be served by other name servers. 802.3, 1998 Edition, section 7.2.4.6. This prefix is assigned by the subnet manager, based upon the port router and the rules for local identifiers. This count does not include frames received with frame-too-long or frame-too-short error. (Optional) Specifies the GUID of the device whose ports you want to view. After the lease period expires, clearing the M_Key protection bits allows any subnet manager to read (and then set) the M_Key. Name servers answer DNS queries (forward incoming DNS queries or resolve internally generated DNS queries) according to the forwarding and lookup parameters configured for the specific domain. Cumulative number of FC errors on one or all gateways. To view the performance monitoring configuration on an IB subnet, enter the show ib pm config command in User Execute mode or Privileged Execute mode.
Sullivan Center Loyola, End Of The World Aphrodite's Child Chords, Flexor Digitorum Profundus Pronunciation, Software Project Cost Estimation Template, Delphi Community Edition Feature Matrix, United Airlines Training Pay, Imputation In Data Science, What Is Debit Card Skimming, Project Topics On Ecosystem,